Products / ARK Electronics / ARK Jetson PAB Carrier

ark electronics logo.webp

Cutting-Edge Flight Controllers, Sensors, and Other Electronics Technologies for Drones & Robotics

ARK Electronics / ARK Jetson PAB Carrier

ARK Jetson PAB Carrier

Flight controller carrier board based on NVIDIA Jetson Orin NX/Nano

Socials
ARK Jetson PAB Carrier

The ARK Jetson PAB Carrier is an NDAA-compliant flight controller carrier board that is based on the Pixhawk Autopilot Bus (PAB) open source standard and the NVIDIA Jetson Orin NX/Nano carrier. It can accept any PAB-based flight controller including ARK Electronics’ ARKV6X.

The board offers a wide range of I/O functionality including Gigabit Ethernet, CAN, MIPI CSI camera inputs, USB, M.2, UART, I2C and more.

Specifications:

Dimensions: 11.6 x 7.2 x 2.3 cm (without Jetson/ flight controller module)
Weight: Without Jetson and Flight Controller Modules – 80g
With Jetson, no Heatsink or Flight Controller – 108g
With Jetson and Heatsink, no Flight Controller – 160g
With Jetson, Heatsink, and Flight Controller – 166g
With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wifi Module – 174g
Power: 5V
4A min
Jetson Carrier I/O: Gigabit Ethernet
Quadruple MIPI CSI Camera Inputs
Triple USB 3.0 + USB 2.0 Host Ports
USB 2.0 Host Port
USB Programming Port
M.2 Key M 2242
M.2 Key E 2230
Mini Display Port
CAN Port
Dual SPI Ports
I2C Port
I2S Port
Debug UART Port
Autopilot I/O: PAB Board to Board Interface
Triple Redundant Digital Power Module Inputs
Full GPS Plus Safety Switch Port
Dual CAN Ports
Triple Telemetry Ports with Flow Control
Eight PWM Outputs
UART/I2C Port
RC Port
SPI Port
Debug Port

Other Products

Servo, debug and Ethernet Adapters
5V/6A power supply module for PAB carrier boards
DroneCAN module with built-in IMU
High-precision three-axis MEMS IMU based on Analog Devices ADIS16507
Combined gyro & accelerometer sensor based on Murata SCH16T
ARK MOSAIC-X5 RTK GPS Receiver Triple-band L1/L2/L5 RTK GNSS receiver based on Septentrio mosaic-X5
L1/L5 RTK GNSS receiver based on u-blox F9P
DroneCAN GNSS receiver based on u-blox M9N
ModalAI VOXL2-based carrier board with built-in RTK GNSS
Raspberry Pi CM4-based flight controller with integrated optical flow sensors